Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning. Please check our printer settings (link) page for all the information to help you dial in your printer with our resin.